Home › TPMS Sensors › Eπ › 007

TPMS Sensor Eπ 007 2024–2026 | 433 MHz OE

These tire pressure monitoring sensors are pre-programmed specifically for the Eπ 007 built from 2024–2026. Each sensor transmits on the 433 MHz band and replicates the original-equipment (OE) protocol, so it speaks the exact language your dashboard expects. Replacing OE references such as , the sensors arrive coded and ready to install — true plug & play with no soldering, no cloning hardware and no workshop visit required.

Because the data telegram already matches the Eπ 007 system, the sensors only need a quick relearn to pair with your vehicle. They are built for accurate, real-time pressure and temperature readings in every wheel, and they hold up to road salt, heat and vibration season after season. Whether you run summer, winter or all-season wheels, one coded sensor per position keeps the TPMS light off and the readings honest.

433 MHzPlug & PlayOE-Protokoll2024–2026

Fitment

Build Year2024–2026
Frequency433 MHz

How to Program the Sensors

Pick the relearn method that matches your Eπ 007 and follow the steps below.

Auto Relearn (by Driving) Supported

  1. Fit the pre-programmed sensors and inflate all four tires to the pressure listed on your door-jamb placard.
  2. Start the engine and, where applicable, set the TPMS to relearn mode via the dashboard menu.
  3. Drive at a steady speed of roughly 20 km/h or more for about 10 to 20 minutes.
  4. The system picks up each sensor automatically and the TPMS warning light switches off once all positions are read.

Choose Your Set

Single Sensor

A single pre-programmed sensor for the Eπ 007 — ideal to replace one failed or aging unit, or to keep a spare on hand. Coded for 433 MHz and ready to fit straight out of the box.

Set of 4

Four pre-programmed sensors for a complete wheel set on the Eπ 007. The right choice when swapping to a second set of summer or winter wheels, or when refreshing all positions at once for consistent readings.

Valve Cap Colors

Each sensor ships with a metal valve and a choice of four cap colors, so you can match the look of your wheels. The color is purely cosmetic — every sensor carries the identical 433 MHz OE protocol.

Black Rubber
Silver
Black
Gunmetal Grey

Pre-Programmed TPMS Sensors

Order pre-programmed 433 MHz TPMS sensors for your Eπ 007 today and fit them as a true plug & play replacement.

All TPMS sensors in our shop →
RDKS / TPMS Sensor Eπ 007

Your Benefits

Specialist automotive retailer since 2006, based in Germany.Sensors coded for thousands of vehicle models across all major brands.Fast dispatch from our own warehouse with reliable shipping.Pre-programmed and tested before they leave the building.

Frequently Asked Questions

Will these TPMS sensors fit my Eπ 007?
Yes. These sensors are pre-programmed for the Eπ 007 built from 2024–2026 and replicate the OE protocol used by your vehicle, including OE references such as . They drop straight into the original valve position as a direct replacement.
How do I relearn the sensors after fitting?
Three methods work: auto relearn by driving at about 20 km/h for 10 to 20 minutes, stationary relearn with a TPMS activation tool, or OBD relearn with a diagnostic scanner. The Eπ 007 supports the method described in the install section above.
Do the sensors really run on 433 MHz?
Yes. Every sensor transmits on the 433 MHz band, which is the frequency the Eπ 007 system expects. They are pre-coded with the matching OE telegram, so the dashboard reads them like the factory units.
Should I buy a single sensor or the set of 4?
Buy a single sensor to replace one failed unit or keep a spare. Choose the set of 4 for a full wheel set — for example when mounting a second set of summer or winter wheels, or refreshing all positions at once.
How long do the sensors last?
The built-in battery typically powers the sensor for several years of normal driving, and the sealed housing withstands heat, vibration and road salt. Service life depends on mileage and climate; many sensors run well beyond five years.
Are these different from the original OE sensors?
Functionally they match: the sensors carry the same 433 MHz OE protocol and report identical pressure and temperature data, replacing references like . The main difference is value — you get factory-grade signal performance without the original-equipment price.